Compatible inverters
Ginlong Solis
Single Phase
RHI-nK-48ES-5G (lowercase n indicates Inverter size, ie 6kW) - Use plugin_solis
Known Serials - 6031 - 1031
Three Phase
RHI-3PnK-HVES-5G (lowercase n indicates Inverter size, ie 10kW) - Use plugin_solis
Known Serials - 110CA
Sofar Solar
Single Phase
Hybrid
HYDxxxxES - Use plugin_sofar_old
Known Serials - ZE1E - ZM1E
Three Phase
Hybrid
HYD xxKTL - Use plugin_sofar
HYD xxKTL-3PH - Use plugin_sofar
Known Serials - SP1 - SP2
PV Only
4.4 KTLX-G3 - Use plugin_sofar
Known Serials - SS2E
SolaX
AC / Battery Storage
Single Phase
AC / RetroFit
X1-AC-n.n
Must be connected by serial Modbus.
Known Serial Numbers G3 - XAC36 (3.6kW version)
Known Serial Numbers G4 - PRE - PRI
Three Phase
RetroFit G3
X3-Fit-nn.nx
Must be connected by serial Modbus.
Known Serial Numbers - F3D - F3E
Hybrid Gen2
Single Phase
Features built in Ethernet
SK-TL (External BMS)
Known Serials - L30 - L37 - L50
SK-SU (Built in BMS)
Known Serials - U30 - U37 - U50
Three Phase
?
Hybrid Gen3
Single Phase
Features built in Ethernet
X1-Hybrid-n.n-x-x
Known Serial Numbers - H1E - HCC - HUE - XRE
Three Phase
X3-Hybrid-nn-x-x
X3-Hybrid-n.n-x-x
Features built in Ethernet (might not be labeled as Ethernet, check this discussion)
Known Serial Numbers - H3DE - H3PE - H3UE
Hybrid Gen4 (Qcells Q.VOLT HYB-G3)
The Gen4 inverters do not feature built-in Ethernet. An external RS485 adapter is required. See Modbus adaptor setup wiki page.
Single Phase
X1-Hybrid-n.n-x
Must be connected by serial Modbus.
Known Serial Number - H43 - H450 - H460 - H475
Three Phase
X3-Hybrid-n.n-x
Must be connected by serial Modbus.
Known Serial Numbers - H34A - H34B - H34T
PV Only
Single Phase
X1-Air, X1-Boost & X1-Mini
Only Firmware Arm 1.37 and above is supported.
Modbus needs to be enabled in your Admin Menu on the Inverter.
Firmware version below use a non standard protocol over RS485, they do no speak Modbus.
Known Serial Numbers - XB3 - XMA - XM3
Three Phase
X3 MIC
On Gen1 Modbus Power Meter support is provided with Firmware Arm 1.38 and above. Gen2 does not provide reading from a Modbus Power Meter at present.
Must be connected by serial Modbus. Don't poll below 5s, don't perform initial connection while Inverter asleep!
Known Serial Numbers - MC10 - MC20 - MC21 - MC5 - MC7 - MP15 - MU80
Untested or in Early Development Phase
Single Phase
Ginlong Solis
Try plugin_solis & plugin_solis_old
Known Serial Numbers - ???
Growatt
Try plugin_growatt
Known Serial Numbers - ???
Sofar Solar
Try plugin_sofar & plugin_sofar_old
Known Serial Numbers - ???
Two Phase (Split Phase)
SolaX Power - A1
Try plugin_solax_a1j1
Known Serial Numbers - ???
SolaX Power - J1
Try plugin_solax_a1j1
Must be connected by serial Modbus.
Known Serial Numbers - ???
Three Phase
Ginlong Solis
Try plugin_solis & plugin_solis_old
Known Serial Numbers - ???
Growatt
Try plugin_growatt
Known Serial Numbers - ???
Sofar Solar
Try plugin_sofar & plugin_sofar_old
Known Serial Numbers - ???